Komatsu — TRANSPORTATION

. ATTACHMENTS, OPTIONS HANDLING 3 M WIDE BLADE blade, etc. FOLDING OF BLADE WARNING CAUTION under the right and left 6 - 10 TRANSPORTA When transportin g the machine, observe all related law s and regulations, an d be careful to assure s TRANSPORTA As a rule, transpo rt the machine on a trail Select a trailer ac cording to the mass and dimensions o f the machine shown i n "SPECIFICATIONS ( PAGE 6-14)". Note that the ma ss and dimensions for tr ansportation shown in SPECIFICAT The 3 m blade of this machine can be fol ded to reduce its width to 3 m for tra nsportation When folding or unf olding the blade, observe t he following it Park the machin e on a hard and level place.

Do not park the machine on a slope. Place blocks 65 mm (2.6 in) high under the right and left e nds of the center blade a nd set the blade in a prop er condition for folding or unfold ing it. If someone touch es a control lever by mista ke, the machin e may s uddenly move and cause a serious accident. Before folding or unfolding the positions. blade, stop the engine and securely set th e work equipment lock le ver and parking brake leve r to their LOCK Fold or unfold th e blade on a level place. If you remove the offset pin on a slope, th e folding blade may turn a nd you may be caught between the blade and track shoe. Do not tilt or angle t he blade when it is folded.

If you do so, th e blad e will interfere with the U-frame 1. Stop the mac hine in a horizontal plac e. 2. Raise the bla de and set it in parallel w ith the mach 3. Place blocks ends of the c 4. Lower the bla de slowly and set it on t