Komatsu — TRANSPORTATION

. ATTACHMENTS, OPTIONS HANDLING 3 M WIDE BLADE ATTACHMENTS, OPTIONS HANDLING 3 M WIDE BLADE CAUTION REMARK 6 - 11 5. Remove lock p ins (1) from both en ds of folding bl ade (3). 6. Remove lock p lates (2) from right a nd left folding blades 7. With center pi n (4) installed to the lock plate (2) back ward approximately 1 If you remove loc k plate (6), lock pin (5) f A t this time, do n ot remove hinge pin (8) in the rear of the 8. Remove lock p There are 4 of late (6) of front offse fset pins (5) and 4 lo t pin (5). ck plates (6) in total, at the 9. right, left, top, Remove offset and bottom. pin (5) and shim (7) above it. 10. Rotate right an d left folding blades (3) backward 1 80 deg . 11.

Match the hole s for rock pin (1) so t hat you can lo ck the b lade by using lock p late (2). 2) and folding blade (3) by using lock pin (1). 12. Fix lock plate ( 2) and folding blade (3) by using lo ck pin ( 13. Install remove d 4 offset pins (5), 2 s ets of shim (7), and 4 lock plates (6) to h oles (9) of center blad e (10). Install removed off set pins (5), shims (7 ), and lock pla tes (6) to holes (9) to prevent them from missing