Deutz — Setting valve clearance

D 2011 w Cylinder head TD 2011 w, TCD 2011 w W 01-01-01 Setting valve clearance Commercial available tools: – Feeler gauges Attention! In case of internal exhaust gas recircula- tion, the inlet valve is opened briefly by an additional cam on the camshaft. This is not to be confused with the valve overlap. Allow the engine to cool down for at least 30 minutes before setting the valve clea- rance. Engine oil temperature The following work procedure describes the setting of the valve clearance on an inlet valve. The procedure is the same for the setting on an outlet valve, taking into consideration the setting dimension. 6 z Unscrew all screws (1). z Remove cylinder head cowling (2).

z Remove gasket. 2 1 © 47540-0 Setting engine to valve overlap z Turn crankshaft in the direction of the engine (arrow). z Turn over crankshaft until the valve overlap is achieved on cylinder 1. © 47541-0 © 12/2008 17770-001 1/6