Deutz — Setting valve clearance

D 2011 w Cylinder head TD 2011 w, TCD 2011 w W 01-01-01 Arrangement of the inlet and exhaust val- ves. IN = inlet valve EX = exhaust valve Valve overlap means: The inlet valve starts opening,exhaust valve closes. Attention! In case of internal exhaust gas recircula- tion, the inlet valve is opened briefly by an additional cam on the camshaft. This is not to be confused with the valve overlap. IN EX EX 6 © 47542-0 z Select feeler gauge. z Check the setting on the appropriate valve. The feeler gauge must pass between the rocker arm's sliding surface and the valve without too much resistance. © 47543-0 Setting valve clearance z Loosen lock nut (1). z Hold adjusting screw (2).

z Set valve clearance. If there is not enough valve clearance, uns- crew setting screw (2). 2 If there is too much valve clearance, turn in setting screw (2). Inlet 1 0.3 mm Outlet 0.5 mm © 47544-0 © 12/2008 17770-001 2/6