D 2011 w Cylinder head TD 2011 w, TCD 2011 w W 01-04-09 Checking piston overhang 8190 Commercial available tools W 01-04-04 Special tools: – Dial gauge. . . . . . . . . . . . . . . . . . 100400 – Digital dial gauge . . . . . . . . . . . . 100410 – Measuring device . . . . . . . . . . . . 100750 – Holder . . . . . . . . . . . . . . . . . . . . . 150180 6 Checking piston overhang z Remove cylinder head. W 01-04-04 z Turn the crankshaft until the respective piston is just in front of the top dead centre (arrow). © 39156-2 z Insert dial gauge 100400 in measuring beam. z Place spacing washers (1) on the sealing surface of the crankcase. z Place measuring beam (2) on the spacing washers.
z Apply stylus of the dial gauge to the crankcase seal- ing surface with pre-tension (arrow). 2 z Adjust dial gauge to "0". 1 1 © 39158-2 © 12/2008 17774-001 1/6