D 2011 w Cylinder head TD 2011 w, TCD 2011 w W 01-04-09 Recess cylinder head z Move the measuring beam. z Apply the stylus to the piston base (arrow) under pre- tension. z Continue turning the crankshaft evenly until the re- versal point of the pointer on the dial gauge is reached. The stylus may not be positioned on the labelling of the piston. Note greatest measured value. 6 © 46934-0 z Select cylinder head gasket according to the largest piston projection measured. 1 recess 0.325 - 0.604 mm 2 recesses 0.605 - 0.704 mm 3 recesses 0.705 - 0.804 mm Example:Piston overhang = 0.7 mm, corre- sponds to cylinder head gasket with 2 recesses (arrow). z Remove the measuring device and spacer discs.
z Install cylinder head. © 47552-1 W 01-04-04 © 12/2008 17774-001 3/6