Komatsu — REPLACEMENT AND INVERSION OF BUCKET

MACHINE OPERATIONS AND CONTROLS OPERATION REMARK When installing the bucket, the O-rings are easily damaged, so fit the O-rings on the boss of the arm end as shown in the dia- gram. When knocking in the pins, move the O-ring down to the regular groove. 4. Install the stopper bolts and nuts for each pin and ring plate, then grease the pin. Handling ring plate Do not make a gap of more than 30 mm (1.18 in) in the ring plate. If there is play in the ring when it is installed to the bucket, replace it with a new part. 3-78