Komatsu — REPLACEMENT AND INVERSION OF BUCKET

OPERATION MACHINE OPERATIONS AND CONTROLS INVERSION WARNING When reversing the bucket, there is danger that the track of the bucket edge will extend outside the normal line. It may hit the cab and cause a serious accident. When the bucket is reversed, pay careful attention during operations to prevent the bucket from hitting the cab. 1. Place the bucket in contact with a flat surface. REMARK When removing the pins, place the bucket so that it is in light contact with the ground. If the bucket is lowered strongly to the ground, the resistance will be increased and it will be difficult to remove the pins.

NOTICE After removing the pins, make sure that they do not become contaminated with sand or mud and that the seals of bushing on both sides do not become damaged. 2. Remove the stopper bolts and nuts, then remove pins (A) and (B), and remove the bucket. 3-79