Komatsu — CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT

MAINTENANCE PROCEDURE MAINTENANCE WHEN REQUIRED CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING If inspection, cleaning, or maintenance is carried out with the engine running, dirt will get into the engine and the engine will suffer damage. Always stop the engine before carrying out these opera- tions. When using compressed air, there is danger that dirt may be blown around and cause serious injury. Always use safety glasses, dust mask, and other protective equipment. Checking Whenever the red piston in dust indicator (1) appears, clean the air cleaner element. NOTICE Do not clean the air cleaner element before the red piston in dust indicator (1) appears.

If the air cleaner element is cleaned frequently before the red piston in the dust indicator appears, the air cleaner cannot provide the proper performance and the cleaning efficiency is lowered. Cleaning or replacing element 1. Open the engine hood at the rear of the machine, remove wing nut (2), take out element (3), then use a clean cloth or tape to cover the air connector inside the air cleaner body to prevent dust from entering. 2. Clean the inside of the air cleaner body. 3. Direct dry compressed air (less than 0.69 MPa (7 kg/cm 2 , 100 psi) to the element from inside along its folds, then direct it from outside along its folds and again from inside.

1) Replace the element which has been cleaned 5 items repeatedly or used throughout a year. 2) Replace element when the dust indicator red piston appears soon after installing the cleaned element even though it has not been cleaned 5 times. 4-20