MAINTENANCE MAINTENANCE PROCEDURE 4. If small holes or thinner parts are found on the element when it is checked with an electric bulb after cleaning, replace the element. NOTICE Do not use an element whose folds or gasket or seal are damaged. When cleaning the element, do not hit it or beat it against something. Wrap unused elements and store them in a dry place. 5. Remove the cloth or tape used as a cover in Step 1. 6. Set the cleaned element in position, and secure it with the wing nut. Tightening torque of wing nut: 4.90 – 5.88 N•m {0.5 – 0.6 kgf•m} 7. Remove evacuator valve (4) and clean it with compressed air. 8.
Press the button of dust indicator (1) to return the red pis- ton to its original position. 4-21