Komatsu — Adjustment

MAINTENANCE MAINTENANCE PROCEDURE INSPECT AND ADJUST COOLING FAN BELT TENSION Inspection The belt should deflect approx. 8 mm (0.3 in) when pressed with “a” finger force of approx. 58.8 N (6 kgf) at a point midway between the alternator pulley and fan pulley. Adjustment Prepare a bar Prepare a wooden block Remove air conditioner compressor (1). 1. Remove bolt (2) and cover (3). 2. Remove bolts (4) and (5), then disconnect the compres- sor from bracket (6). 3. Move the compressor to the place easy to adjust fan belt, with the compressor hose still fitted to it. 4-59