Komatsu — ADDITIONAL FILTER FOR BREAKER

MACHINES READY FOR ATTACHMENTS ATTACHMENTS AND OPTIONS SELECTOR VALVE This valve (2) selects the flow of the hydraulic oil. Position (a): When breaker is used Position (b): When general attachment is used (crusher, etc.) ATTACHMENT CONTROL PEDAL This pedal (3) is used to operate the attachment. LOCK PIN This pin (4) is used to lock the control pedal. Position (a): lock Position (b): Pedal half stroke position (when using a slide arm, or other attachment using a small flow) Position (c): Pedal full stroke position (when using a crusher, power ripper, or other attachment using a large flow) Set the lock pin at the lock position when attachment is not used.

ADDITIONAL FILTER FOR BREAKER This filter (5) prevents deterioration of the hydraulic oil when the breaker is used. Oil flows only when the selector valve is turned to the breaker position. 6-8