Komatsu — HYDRAULIC CIRCUIT CONNECTION

ATTACHMENTS AND OPTIONS MACHINES READY FOR ATTACHMENTS HYDRAULIC CIRCUIT HYDRAULIC CIRCUIT CONNECTION When connecting the attachment, connect the hydraulic circuit as follows. 1. Check that the stop valve is locked, then remove plug (1). Be careful not to lose or damage any parts that are removed. 2. Connect the attachment piping supplied by the attach- ment manufacturer. Depending on the piping for the attachment, it may be necessary to remove elbow (2). The dimensions for elbow for the attachment at the stop valve end are as shown in the diagram on the right; for details of the dimensions at the attachment end, please consult the attachment manufacturer. 6-9