MACHINES READY FOR ATTACHMENTS ATTACHMENTS AND OPTIONS OPERATION WARNING Do not put your foot on the pedal except when operating the pedal. If rest your foot on the pedal during operations, and it is depressed by accident, the attachment may move suddenly and cause serious dam- age or injury. The operation of the attachment is as follows. WHEN USING BREAKER NOTICE If breaker operations are carried out with lock pin (1) at full stroke position (c), it will cause overheating and damage to the hydraulic equipment. Never carry out breaker opera- tions with the pin in this position. 1. Set lock pin (1) to half stroke position (b) and operate the pedal to the front to operate the breaker. 2.
After completion of operations, set the lock pin to LOCK position (a) to lock the pedal. Check that the stop valve is at the FREE position. Precautions when using Check that the selector valve is at the position for using the breaker. For other precautions when using the breaker, see the instruction manual provided by the breaker manufac- turer. When the breaker is used, the hydraulic oil degrades faster than in normal operation. Shorten the mainte- nance interval of the hydraulic oil and filter element. See "MAINTENANCE INTERVAL FOR HYDRAULIC BREAKER (PAGE 4-18)". 6-10