Komatsu — WHEN ADJUSTING OIL AMOUNT FOR ATTACHMENT

ATTACHMENTS AND OPTIONS MACHINES READY FOR ATTACHMENTS WHEN USING GENERAL ATTACHMENT SUCH AS CRUSHER 1. Set lock pin (1) to the full stroke position (c) and operate the pedal to operate the breaker. 2. After completion of operations, set the lock pin to LOCK position (a) to lock the pedal. Precautions when using Check that the stop valve is at the FREE position. Confirm that the selector valve is set to the position for general attachments such as the crusher. For other precautions when using the attachment, see the instruction manual provided by the attachment manufacturer.

WHEN ADJUSTING OIL AMOUNT FOR ATTACHMENT If it is necessary to adjust the oil amount for the attachment, use the adjusting bolt under the pedal. Loosen locknut (1) and turn bolt (2) to adjust. Dimension “a” increased: oil amount decreased Dimension “a” decreased: oil amount increased 6-11