MACHINES READY FOR ATTACHMENTS ATTACHMENTS AND OPTIONS LONG-TERM STORAGE If the equipment is not to be used for a long period, do as follows. Set the stop valve to the LOCK position. Install the blind plugs and O-rings to the valves. Set the selector valve to the “when not use” position. Lock the lock pin to the lock position. If the pedal is operated when there is no breaker or general attachment installed, it will cause overheating and other problems.
SPECIFICATIONS Hydraulic specifications Flow Safety valve cracking pressure When using breaker:17.17 MPa (175 kg/cm 2 , 2485 PSI) When using other attachments:25.51 MPa (260 kg/cm 2 , 3692 PSI) 6-12 Lock pin position Flow A B 1 Pedal lock — — 2 Half stroke 55 liters (14.52 US gal)/min 45 liters (11.88 US gal)/min 3 Full stroke 110 liters (29.04 US gal)/min 90 liters (23.76 US gal)/min