Komatsu — CONTROL LEVERS, PEDALS

OPERATION EXPLANATION OF COMPONENTS CONTROL LEVERS, PEDALS (1) Safety lock lever (5) Travel levers (2) Left work equipment control lever (6) Traveling accelerator pedal (3) Right work equipment control lever (only machines with blade specification) (4) Blade control lever (only machines with blade specification) SAFETY LOCK LEVER WARNING When leaving the operator's compartment, set the safety lock lever securely to the LOCK position. If the safety lock lever is not at the LOCK position and the control levers are touched by mistake, it may lead to serious personal injury.

If the safety lock lever is not placed securely at the LOCK position, the control lever may move and cause a serious accident or injury. Check that the condition of the lever is as shown in the diagram. When pulling the safety lock lever up, be careful not to touch the work equipment control lever. When pushing the safety lock lever down, be careful not to touch the work equipment control lever. Lever (1) is a device to lock the work equipment, swing, travel, and blade control levers. Pull the lever up to apply the lock.

This lock lever is a hydraulic lock, so even if it is in the lock position, the work equipment control lever and travel lever will move, but the work equipment, travel motor, and swing motor will not work. 3-15