Komatsu — CONTROL LEVERS, PEDALS

EXPLANATION OF COMPONENTS OPERATION WORK EQUIPMENT CONTROL LEVER This Left work equipment control lever (2) is used to operate the arm and upper structure. Arm operation Swing operation (a) Swing to right (b) Swing to left (c) Arm IN (d) Arm OUT N (Neutral): The upper structure and arm are held in position and do not move. This Right work equipment control lever(3) is used to operate the arm and upper structure. Boom operation Bucket operation (e) RAISE (f) LOWER (g) DUMP (h) CURL N (Neutral): The boom and bucket are held in position and do not move. BLADE CONTROL LEVER (Only machines with blade specification) This lever (4) is used to control the blade. (a): LOWER (b): RAISE 3-16