MACHINE OPERATIONS AND CONTROLS OPERATION CHECK FUEL LEVEL, ADD FUEL WARNING Be careful not to let the fuel overflow when adding fuel. This may cause a fire. Wipe up all fuel that is spilled. If there is sand where the fuel is spilled, remove all the sand. Fuel is flam- mable and dangerous. Keep it away from any flame. 1. Turn starting switch (1) to ON, and the monitor light up. 2. Check fuel gauge (2). If insufficient, refill fuel from fuel filler (F) and confirm the fuel level from sight gauge (G). Fuel tank capacity: 115 liters (30.36 US gal) 3. After adding fuel, tighten fuel filler cap securely.
REMARK If breather hole (3) on the cap is clogged, the pressure in the tank will drop and fuel will not flow. Clean the hole from time to time. 3-42