SK1050 Operator’s Manual Controls - 35 Controls Item Description Notes 1. Left track drive control 2. Right track drive control To move forward, push. To move backward, pull. To go faster in either direction, move control farther from neutral position. To stop, move to neutral position. To turn right, move left control farther forward than right control. To turn left, move right control farther forward than left control. To counter-rotate in either direction, move controls in opposite directions as indicated above. Track drive joystick (optional) To move forward, push. To move backward, pull. To go faster in either direction, move control farther from neutral. To stop, move to neutral.
To steer while moving forward, push joystick forward, then move left or right. Unit will gradually turn left or right. To steer while moving backward, pull joystick back, then move left or right. Unit will gradually turn left or right. For tight steering in low speed, move joystick to center position then to left or right side. Tracks will counter rotate and turn unit in a tight circle. 3. Parking brake switch c00ic097w.eps To engage, move red switch toward operator and press back of switch down. To disengage, move red switch toward operator and press front of switch down. IMPORTANT: • Ensure unit is stopped before setting parking brake. • Parking brake disengages hydraulics.