Ditch Witch SK1050 — Startup/10 Hour

SK1050 Operator’s Manual Service - 77 Startup/10 Hour Check Hydraulic Hoses Pressurized fluid or air could pierce skin and cause severe injury. Refer to operator’s manual for proper use. 270-6035 To help avoid injury: Use a piece of cardboard or wood, rather than hands, to search for leaks. Wear protective clothing, including gloves and eye protection. Before disconnecting a hydraulic line, turn engine off and operate all controls to relieve pressure. Lower, block, or support any raised component with a hoist. Cover connection with heavy cloth and loosen connector nut slightly to relieve residual pressure. Catch all fluid in a container.

Before using system, check that all connections are tight and all lines are undamaged. If you are injured, seek immediate medical attention from a doctor familiar with this type of injury. Check hydraulic hoses for leaks at startup and every 10 hours.