Specifications - 94 SK1050 Operator’s Manual SK1050 Basic Unit The rated operating capacity for this machine was determined using a standard bucket in the drive position with center of gravity 7 in (18 cm) from the mounting plate. Depending on the attachment, the actual operating capacity of the attachment may vary. Battery SAE reserve capacity 110 min, SAE cold crank @ 0°F (-18°C) 800 amp, 12V electrical system Dimensions U.S. Metric Bucket rollback angle, full height 90° Dump angle, standard bucket at max dump height 35° Bucket width, max 52 in Bucket width, min 36 in Swing radius, max, with standard bucket 65 in Swing radius, no attachment 44 in Rear overhang, max 29 in Performance U.S.
Metric Ground drive speed, forward and reverse 4.7 mph 7.6 km/h Ground pressure, 9” (230 mm) tracks * 4.9 psi 0.34 bar Ground pressure, 7” (180 mm) tracks * 6.3 psi 0.43 bar Tipping capacity 3035 lb 1377 kg Operating capacity (35% of tipping capacity) 1062 lb 482 kg Machine weight (fluids full) Includes machine weight, 175-lb (80-kg) bucket, 165-lb (75-kg) operator 3435 lb 1558 kg Fluid Capacities U.S. Metric Fuel tank 10.5 gal 40 L Engine oil, with filter 5.0 qt 4.7 L Hydraulic reservoir 9.2 gal 35 L Coolant capacity 1.28 gal 4.8 L