Ditch Witch SK1050 — SK1050 Power Specifications

SK1050 Operator’s Manual Specifications - 95 SK1050 Power Specifications SK1050 Power Specifications Engine: Yanmar ® 3TNV88C, diesel, EPA Tier 4 Final, EU Stage IIIA Auxiliary: double gear pump Ground drive: dual hydrostat Noise Levels This machine can generate sound levels exceeding 80 dB. Always wear appropriate hearing protection when operating machine. Find sound power and pressure information at www.ditchwitch.com, or contact customersupport@ditchwitch.com. Vibration Level Average vibration transmitted to the operator’s hand during normal operation with a loader bucket is 4.31 m/sec 2 .

Average vibration transmitted to the whole body during normal operation with a loader bucket is 1.07 m/sec 2 . Actual vibration will depend upon the attachment being used. Specifications are called out according to SAE recommended practices. Specifications are general and subject to change without notice. If exact measurements are required, equipment should be weighed and measured. Due to selected options, delivered equipment may not necessarily match that shown. Power U.S.

Metric Number of cylinders 3 Displacement 100.1 in3 1.64 L3 Bore 3.46 in 88 mm Stroke 3.54 in 90 mm Manufacturer’s gross power rating (per SAE J1955) 36.9 hp 27.5 kW Estimated net power rating (per SAE 1348) 35.1 hp 26.2 kW Rated engine speed 3000 rpm 3000 rpm Hydraulic System U.S. Metric Flow rate (pump 1) 8.8 gpm 33 L/min Flow rate (pump 2) 5.1 gpm 20 L/min Pressure 3625 psi 250 bar Flow rate 15 gpm 56.8 L/min Pressure 3625 psi 250 bar