36 Product Information Section (D6T LGP (OEM)) WEBM1000 Identification Information Identification Information 26 Plate Locations and Film Locations The Product Identification Number (PIN) will be used to identify a powered machine that is designed for an operator to ride. Caterpillar products such as engines, transmissions, and major attachments that are not designed for an operator to ride are identified by Serial Numbers. For quick reference, record the identification numbers in the spaces that are provided below the illustration. 25 Illustration 26 The Service Information Number Plate is located inside the cab on the left side of the dash.
27 Illustration 25 The PIN plate is attached to the ROPS mounting pad on the transmission. Machine PIN Year of Manufacture Illustration 27 Transmission Serial Number 28 Illustration 28 The Serial Number Plate is located on the left side of the cylinder block near the rear of the engine. The following information is stamped on the Serial Number Plate: engine serial number, model and arrangement number. Engine Serial Number