John Deere 400 6076 — John Deere 400 6076 User Manual

Cylinder Block, Liners, Pistons and Rods/Preliminary Liner, Piston, and Rod Checks PRELIMINARY LINER, PISTON AND ROD CHECKS • Scuffed or Scored Pistons: • Stuck Rings: Insufficient lubrication. Insufficient cooling. Improper piston-to-liner clearance. Coolant leakage in crankcase. Misaligned or bent connecting rod. Improperly installed piston. Low oil level. Improper operation. Incorrect connecting rod bearing clearance. Carbon build-up in ring groove. Improper break-in. Worn piston. Contaminated oil. Distorted cylinder liner. Improper oil classification. Improper periodic service. Poor operating conditions. Coolant leakage in crankcase. Excessive cylinder liner taper.

• Cylinder Liner Wear and Distortion: Incorrectly installed compression rings. Insufficient lubrication. Uneven cooling around liner. Improper piston-to-liner clearance. Liner bore damage. • Warped Cylinder Block: • Worn or Broken Compression Rings: Insufficient cooling. Insufficient lubrication. Insufficient cooling. Improper ring installation. Improper combustion. Improper timing. Abrasives in combustion chamber. • Broken Connecting Rod: 10 8 Inadequate piston-to-liner clearance. Worn connecting rod bearing. Distorted cylinder liner. Piston pin failure. • Clogged Oil Control Ring: Improper oil. Excessive Blow-by. Contaminated oil. Improper periodic service. Low operating temperature.

• Piston Pin and Snap Ring Failure: Misaligned connecting rod. Excessive crankshaft end play. Incorrect snap rings. • Mottled, Grayish or Pitted Compression Rings: • Dull Satin Finish and Fine Vertical Scratches on Rings: Internal coolant leaks. Dirt and abrasive in air intake system. CTM8,GR10,37 -19-17AUG94 CTM42 (24MAR95) 10-8 6076 Diesel Engines—S.N. (500000— ) 160101 PN=93