John Deere 400 6076 — John Deere 400 6076 User Manual

Cylinder Block, Liners, Pistons and Rods/Remove Pistons and Connecting Rods REMOVE PISTONS AND CONNECTING RODS The engine does not always have to be removed from the machine to service the pistons and connecting rods. If engine is to be removed, see your Machine Technical Manual. N CAUTION: DO NOT drain engine coolant until the temperature is below operating temperature. Then slowly loosen water pump drain valve (A) and block drain valve (B) to relieve any pressure. RG5836 -UN-28AUG91 IMPORTANT: Both water pump drain valve and block drain valve must be opened to completely drain both sides of the engine. 1. Drain all coolant and engine oil. 10 9 RG,CTM42,G10,19-19-29OCT92 NOTE:

If engine is to be completely disassembled, follow DISASSEMBLY SEQUENCE in Group 04. 2. Remove cylinder head. (See REMOVE CYLINDER HEAD in Group 05.) 3. Remove oil pan and oil pump. (See REMOVE ENGINE OIL PUMP in Group 20.) A—#1 Keystone Compression Ring B—#2 Keystone Compression Ring C—Oil Control Ring with Expander D—Snap Ring (2 used) E—Piston F—Piston Pin G—Piston Pin Bushing H—Connecting Rod I—Bearings J—Connecting Rod Cap K—Special Cap Screw RG3657 -UN-13DEC88 RG,CTM42,G10,30-19-14FEB95 CTM42 (24MAR95) 10-9 6076 Diesel Engines—S.N. (500000— ) 160101 PN=94