Cylinder Block, Liners, Pistons and Rods/Visually Inspect Pistons 3. Clean piston ring grooves using a piston ring groove cleaning tool. N CAUTION: Always follow manufacturer’s instructions, and safety steps exactly. When washing pistons, always use a stiff bristle brush—NOT A WIRE BRUSH—to loosen carbon residue. DO NOT bead blast ring groove areas. 4. Clean pistons by any of the following methods: • Immersion-Solvent “D-Part” • Hydra-Jet Rinse Gun • Hot water with liquid detergent soap. RG6088 -UN-27JAN92 If cleaning with hot water and liquid detergent, soak pistons in a 50 per cent solution of liquid household detergent and hot water for 30 to 60 minutes.
Use a stiff bristle brush—NOT A WIRE BRUSH—to loosen carbon residue. Dry with compressed air. 10 16 RG,CTM86,G10,13-19-14FEB95 VISUALLY INSPECT PISTONS 1. Carefully inspect clean pistons under magnification. Check for: • Signs of fatigue • Fine cracks in piston head (A) • Bent or broken ring lands (B) • Cracks in the skirt (C) at the inner and outer ends of the piston pin bore • Original machining marks must be visible • Excessive piston skirt wear If any defects are found, replace the piston and liner as a set. RG3326 -UN-13DEC88 (Defects Exaggerated) CTM42 (24MAR95) 10-16 6076 Diesel Engines—S.N. (500000— ) RG,CTM61,G10,10-19-29OCT92 160101 PN=101