Cylinder Block, Liners, Pistons and Rods/Install Cylinder Liners 4. Finish seating cylinder liners using a clean, hardwood block and hammer. 5. Gently tap hardwood block over top of cylinder liner with mallet. NOTE: Cylinder liner will protrude over top of cylinder block more than normal due to uncompressed packings and O-rings. IMPORTANT: If you suspect that a packing may have sheared or displaced liner installation, remove liner and packing assembly. If no damage is found, check packing and O-rings for proper position. Re-soap packings and reinstall liner assembly. RG5815 -UN-12AUG91 6. Hold liners in place with large flat washers and cap screws. Turn cap screws snug but do not tighten. 7.
Clean cylinder liner bores with waterless hand cleaner after installation. Wipe dry with clean towels. 8. Apply clean engine oil to liner bores immediately to prevent corrosion. 10 39 RG,CTM42,G10,13-19-14FEB95 CTM42 (24MAR95) 10-39 6076 Diesel Engines—S.N. (500000— ) 160101 PN=124