John Deere 400 6076 — John Deere 400 6076 User Manual

Cylinder Block, Liners, Pistons and Rods/Install Cylinder Liners INSTALL CYLINDER LINERS IMPORTANT: Install cylinder liners into same cylinder block bore as removed. DO NOT scuff liner packing across upper counterbore. Pitted or eroded liners that meet reuse guidelines should be rotated 90˚ from their removed position. See VISUALLY INSPECT CYLINDER LINERS, earlier in this group for reuse guidelines. RG5814 -UN-12AUG91 1. Install liner and packing in block bore with mark toward front of engine, unless liner OD is pitted or eroded. If liner OD is pitted or eroded, but still within acceptable service limits, rotate liner 90˚ from it’s removed position.

Pitted sections of the liner should be facing the front or rear of engine. 2. A resistance will be felt when cylinder liner is aligned in pilot bore. 10 38 3. Using only the pressure of both palms, the cylinder liner should drop to a point nearly flush with the upper flange of the cylinder liner and cylinder block. RG,CTM42,G10,12-19-12APR93 CTM42 (24MAR95) 10-38 6076 Diesel Engines—S.N. (500000— ) 160101 PN=123