John Deere 400 6076 — John Deere 400 6076 User Manual

Cylinder Block, Liners, Pistons and Rods/Install Cylinder Liner O-Rings and Packings INSTALL CYLINDER LINER O-RINGS AND PACKINGS IMPORTANT: DO NOT use oil on cylinder liner packing or O-rings. Oil can cause the red packing to swell, which squeezes liner and could possibly cause a scored piston. 1. Pour AR54749 Soap Lubricant into a suitable container. 2. Dip new packings and O-rings in soap before installation. Do not leave packings or O-rings in soap to soak. 3. Install the black viton O-ring (A) in the lower O-ring groove of the cylinder block (C). RG3826 -UN-13DEC88 4. Install the red silicone O-ring (B) in the upper O-ring groove of the cylinder block. 10 37 S11,0402,BA -19-16AUG94 5.

Turn cylinder liner (B) upside-down and install the square neoprene packing (A) over outside of liner. 6. Slide packing down firmly against second shoulder of the liner. NOTE: Make sure the square packing is not twisted. RG3827 -UN-13DEC88 7. Coat the liner packings sealing area of the cylinder liner and cylinder block O-rings with liquid soap. S11,2010,JT -19-29OCT92 CTM42 (24MAR95) 10-37 6076 Diesel Engines—S.N. (500000— ) 160101 PN=122