John Deere 400 6076 — John Deere 400 6076 User Manual

Crankshaft, Main Bearings and Flywheel/Check Crankshaft End Play 4. Check vibration damper radial runout by positioning a dial indicator (A) so probe (B) contacts damper O.D. 5. Rotate crankshaft using JDE81-1 Flywheel Turning Tool. 6. Note dial indicator reading. RG5824 -UN-12AUG91 DAMPER RADIAL RUNOUT SPECIFICATION Maximum . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.02 mm (0.040 in.) If runout exceeds specifications, replace vibration damper. RG,CTM42,G15,6 -19-16AUG94 CHECK CRANKSHAFT END PLAY 1. Completely engage then release the clutch lever. 2. Place a dial indicator on damper face. IMPORTANT:

Use care not to damage or distort the timing gear cover or bearing inserts when prying. Do not pry on outer interia ring of damper. 15 13 3. Pry with flat bar between the damper pulley and timing gear cover. RG5934 -UN-28AUG91 CRANKSHAFT END PLAY SPECIFICATIONS End Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.038—0.380 mm (0.0015—0.0150 in.) NOTE: New thrust bearings will usually restore proper end play. RG,CTM42,G105,8-19-29OCT92 CTM42 (24MAR95) 15-13 6076 Diesel Engines—S.N. (500000— ) 160101 PN=142