John Deere 400 6076 — John Deere 400 6076 User Manual

Crankshaft, Main Bearings and Flywheel/Remove Front Oil Seal REMOVE CRANKSHAFT FRONT OIL SEAL (WITH TIMING GEAR COVER INSTALLED ON ENGINE) IMPORTANT: Whenever front oil seal is replaced, the wear sleeve must also be replaced. NOTE: If timing gear cover is going to be removed from engine, remove front seal after timing gear cover is removed. RG6471 -UN-26OCT92 1. Check oil seal and wear sleeve for wear, damage, or leakage. 2. Center punch seal casing at 12 O’clock position. RG,CTM42,G15,38-19-03MAY93 3. Drill 1/8 in. hole in casing. RG6472 -UN-26OCT92 15 16 RG,CTM42,G15,39-19-29OCT92 4. Using JDG719 Seal Puller along with JDE38-2 Shank, JDE38-3 Hammer, and metal screw; remove seal. 5.

Remove keyway from keyslot of crankshaft. RG6473 -UN-26OCT92 RG,CTM42,G15,40-19-29OCT92 CTM42 (24MAR95) 15-16 6076 Diesel Engines—S.N. (500000— ) 160101 PN=145