Crankshaft, Main Bearings and Flywheel/Remove Rear Oil Seal Housing and Wear Sleeve REMOVE REAR OIL SEAL HOUSING AND WEAR SLEEVE (WITH ENGINE DISASSEMBLED) These instructions are for use when the oil seal housing and oil pan will be removed. Refer to REMOVE CRANKSHAFT REAR OIL SEAL AND WEAR SLEEVE (WITH OIL SEAL HOUSING INSTALLED), earlier in this group, for instructions without the oil seal housing and oil pan being removed. RG3839 -UN-14DEC88 1. Remove rear oil seal housing (A). IMPORTANT: If rear oil seal is replaced, also replace rear wear sleeve. The wear sleeve does not have to be removed to remove crankshaft. 2. Rear oil seal (B) will come off with housing.
Use a small punch and hammer to remove oil seal. Discard seal. RG,CTM42,G15,14-19-16AUG94 15 26 CTM42 (24MAR95) 15-26 6076 Diesel Engines—S.N. (500000— ) 160101 PN=155