John Deere 400 6076 — John Deere 400 6076 User Manual

Crankshaft, Main Bearings and Flywheel/Check Main Bearing Clearance 1. Loosen main bearing cap screws and washers. 2. Remove main bearing caps by extending cap screws (A) and forcing heads of screws together. Wiggle bearing cap (B) back and forth while applying an upward force with cap screws until free from main bearing cap support. 3. Use PLASTIGAGE to measure oil clearance on each main bearing as they are removed. See CHECK MAIN BEARING OIL CLEARANCE later in this group. RG5833 -UN-12AUG91 RG,CTM42,G15,17-19-14SEP94 CHECK MAIN BEARING CLEARANCE The use of PLASTIGAGE will determine wear but will not determine condition of the bearing or journal surfaces. 1.

Put a strip of PLASTIGAGE in the center of the main bearing cap (with insert) about three-fourths of the width of the bearing. 15 28 T42576NY -UN-09NOV88 2. Use oil (SAE30) on PLASTIGAGE to prevent smearing. 3. Install cap and tighten to 203 N·m (150 lb-ft). 4. Remove cap and compare width of PLASTIGAGE with scale provided on wrapper to determine oil clearance. MAIN BEARING CLEARANCE SPECIFICATIONS Main Bearing-to-Journal Clearance . . . . . . . . . . . . 0.030—0.107 mm (0.0012—0.0042 in.) S11,0403,Z -19-08AUG94 CTM42 (24MAR95) 15-28 6076 Diesel Engines—S.N. (500000— ) 160101 PN=157