Crankshaft, Main Bearings and Flywheel/Inspect Crankshaft 7. Carefully check the crankshaft for cracks in the area of rod journal oil holes (A) and at journal fillets (B). Replace crankshaft if any cracks are found. IMPORTANT: Small cracks may not be visible to the eye. Use a method such as the Fluorescent Magnetic Particle method. This method magnetizes the crank, employs magnetic particles which are fluorescent and glow under “black light”. The crankshaft must be de-magnetized after the test. 8. Check condition of dowel pin in crankshaft rear flange. Dowel pin must not be cracked or chipped. Measure protrusion of dowel pin from face of flange.
If dowel pin is damaged, or protrusion is not within specifications, replace dowel pin. If dowel pin is damaged, also inspect flywheel for damage. RG5093 -UN-15DEC88 NOTE: If replacing dowel pin, crankshaft must be removed to prevent damage to crankshaft thrust bearings. CRANKSHAFT DOWEL PIN SPECIFICATIONS Dowel Pin Protrusion From Rear Flange . . . . . . . . . . . . . . . . 13.5—14.5 mm (0.53—0.57 in.) 15 31 RG,CTM42,G15,94-19-16AUG94 CTM42 (24MAR95) 15-31 6076 Diesel Engines—S.N. (500000— ) 160101 PN=160