Crankshaft, Main Bearings and Flywheel/Thrust Bearing New Part Specifications THRUST BEARING NEW PART SPECIFICATIONS IMPORTANT: Install thrust bearing in cylinder block and tighten to specification before regrinding or polishing thrust surfaces to assure that all surface on bearing and on block web are correctly aligned. THRUST BEARING NEW PART SPECIFICATION Thrust Washer Clearance Base Circle Diameter . . . . . . . . . . . 123.70—125.30 mm (4.87—4.93 in.) Thrust Surface Thickness . . . . . . . . . . . . . . . . . . 37.44—37.54 mm (1.474—1.478 in.) Relief Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45˚ Bearing Overall Width . . . . . . . . . . . . . . . .
. . . . 39.16—39.66 mm (1.542—1.561 in.) RG5269 -UN-14DEC88 Maximum Thrust Surface Runout . . . . . . . . . . 0.025 mm (0.0010 in.) A—Thrust Washer Clearance Base Circle Diameter B—Thrust Surface Thickness C—Relief Angle D—Bearing Overall Width 15 36 S55,2015,P -19-16AUG94 CTM42 (24MAR95) 15-36 6076 Diesel Engines—S.N. (500000— ) 160101 PN=165