John Deere 400 6076 — John Deere 400 6076 User Manual

Camshaft and Timing Gear Train/Measure Camshaft Drive Gear-to-Crankshaft Gear Backlash 4. Remove magnetic pick-up (A, if equipped) and injection pump drive gear cover (B). 5. Check camshaft end play. (See CHECK CAMSHAFT ENDPLAY earlier in this group.) RG5766 -UN-06AUG91 IMPORTANT: Whenever timing gear cover is removed, ALWAYS install a new front oil seal. 6. Remove timing gear cover (C). 7. Remove front oil seal from timing gear cover. Install a new seal after timing gear cover is installed. See INSTALL FRONT OIL SEAL (WITH TIMING GEAR COVER INSTALLED ON ENGINE) in Group 15. 8. Remove front crankshaft wear sleeve.

RG,CTM42,G16,9 -19-16AUG94 MEASURE CAMSHAFT DRIVE GEAR-TO-CRANKSHAFT GEAR BACKLASH 16 8 Measure backlash between camshaft drive gear and crankshaft gear in three (3) different positions around the camshaft gear. Use a magnetic base dial indicator with indicator plunger resting on camshaft gear tooth. CAMSHAFT DRIVE GEAR-TO-CRANKSHAFT GEAR BACKLASH SPECIFICATION Camshaft Gear Backlash . . . . . . . . . . . . . 0.076 mm (0.003 in.) min. Replace gears if backlash is not within specification. RG5770 -UN-06AUG91 CTM42 (24MAR95) 16-8 6076 Diesel Engines—S.N. (500000— ) RG,CTM42,G16,13-19-29OCT92 160101 PN=189