John Deere 400 6076 — John Deere 400 6076 User Manual

Camshaft and Timing Gear Train/Measure Thrust Washer Thickness REMOVE CAMSHAFT GEARS NOTE: Camshaft gears are pressed onto the camshaft. Removal of gears from camshaft will require approximately a 10-ton press. IMPORTANT: Prevent camshaft from striking floor when pushing camshaft nose out of gear. Camshaft may be damaged if it is allowed to fall to the floor. 1. Support outer camshaft gear (A) in a press. RG5774 -UN-06AUG91 RG5773 -UN-06AUG91 2. Remove outer gear from camshaft. 3. Support inner camshaft gear (B) in a press. 4. Remove inner gear from camshaft. 5. Clean camshaft and gears in solvent. Dry with compressed air. 16 11 RG,CTM42,G16,17-19-29OCT92 MEASURE THRUST WASHER THICKNESS 1.

After removal of camshaft, check the two thrust washers individually for proper thickness. THRUST WASHER THICKNESS SPECIFICATIONS RG5775 -UN-06AUG91 Thrust Washer Thickness . . . . . . . . . . . . . . . . . . . . 2.24—2.34 mm (0.088—0.092 in.) 2. Replace washers if worn or damaged. RG,CTM42,G16,18-19-29OCT92 CTM42 (24MAR95) 16-11 6076 Diesel Engines—S.N. (500000— ) 160101 PN=192