Camshaft and Timing Gear Train/Visually Inspect Camshaft INSPECT AND MEASURE CAMSHAFT FOLLOWERS 1. Inspect camshaft followers for uneven wear or damage. Also inspect corresponding camshaft lobe for wear or damage. Replace as necessary. RG2745 -UN-23FEB89 2. Measure follower OD and follower bore ID in cylinder block. CAMSHAFT FOLLOWER AND BORE SPECIFICATIONS Camshaft Follower OD . . . . . . . . . . . . . . . . . . . . 17.33—17.35 mm (0.682—0.683 in.) Camshaft Follower Bore ID in Block . . . . . . . . . . . . . . . . . . . . . . . . . 17.384—17.440 mm (0.6845—0.6865 in.) Replace cam followers that are not within specification.
Replace cylinder block if any one cam follower bore is not within specification. RG,CTM42,G16,19-19-15SEP94 VISUALLY INSPECT CAMSHAFT 16 12 1. Clean camshaft in solvent. Dry with compressed air. 2. Visually inspect camshaft lobes (A) and journals (B) for wear or damage. Replace as necessary. New camshaft followers can be used with old camshaft (if camshaft is serviceable). DO NOT reuse old cam followers with a new camshaft. RG3500 -UN-06AUG91 NOTE: Very light score marks may be found, but are acceptable if valve lift is within specification. Pitting or galling dictates replacement.
(See CHECK VALVE LIFT earlier in this group.) RG,CTM42,G16,20-19-29OCT92 CTM42 (24MAR95) 16-12 6076 Diesel Engines—S.N. (500000— ) 160101 PN=193