Camshaft and Timing Gear Train/Measure Camshaft Lobe Lift MEASURE CAMSHAFT JOURNAL OD AND BUSHING ID 1. Measure each camshaft journal OD. If camshaft journal OD is not within specification, install a new camshaft. T81260 -UN-07NOV88 2. Measure each camshaft bushing ID when installed in cylinder block. Compare measurements with specs given below. Replace camshaft and bushings as needed. CAMSHAFT JOURNAL AND BUSHING SPECIFICATIONS Camshaft Journal Diameter (NEW) . . . . . . . . . . 66.987—67.013 mm (2.6373—2.6383 in.) Camshaft Bushing ID (NEW) . . . . . . . . . . . . . . . 67.076—67.102 mm (2.6408—2.6418 in.) RG,CTM42,G16,21-19-15SEP94 MEASURE CAMSHAFT LOBE LIFT 1.
Measure each camshaft lobe at its highest point and at its narrowest point. Subtract narrowest dimension from highest dimension to find camshaft lobe lift. 16 13 T81262 -UN-01NOV88 If camshaft lobe lift is not within the wear specification on any one lobe, install a new camshaft. CAM LOBE LIFT NEW PART SPECIFICATION Intake Lobe Lift . . . . . . . . . . . . . . . . . . . . . . . . . . 7.69—7.79 mm (0.303—0.307 in.) Wear Limit . . . . . . . . . . . . . . . . . . . . . . . . . 7.19 mm (0.283 in.) Exhaust Lobe Lift . . . . . . . . . . . . . . . . . . . . . . . . . 8.25—8.35 mm (0.325—0.329 in.) Wear Limit . . . . . . . . . . . . . . . . . . . . . . . . .
7.75 mm (0.305 in.) RG,CTM42,G16,22-19-16AUG94 CTM42 (24MAR95) 16-13 6076 Diesel Engines—S.N. (500000— ) 160101 PN=194