John Deere 400 6076 — John Deere 400 6076 User Manual

Camshaft and Timing Gear Train/Install Camshaft Gears INSTALL CAMSHAFT GEARS 1. Support camshaft under first bearing journal in a hydraulic press. 2. Install Woodruff key (A). Lubricate camshaft nose with FEL-PRO ® C-670 Molybdenum Disulfide Paste. RG5776 -UN-06AUG91 3. Set inner gear (B) on camshaft with thrust washer surface to the inside (toward the camshaft). Align Woodruff key and keyway 4. Install gear onto nose of camshaft. Push inner gear on until tight against the camshaft bearing journal. 5. Set outer gear on camshaft with timing mark upward (away from the camshaft). Align Woodruff key and keyway (C) of outer gear (D). 6.

Push outer gear onto camshaft nose until tight against inner gear. A—Woodruff Key B—Inner Gear C—Keyway D—Outer Gear RG5777 -UN-17SEP91 16 14 RG,CTM42,G16,23-19-29OCT92 7. Support each end of the camshaft on centers. Use a dial indicator with plunger resting on the thrust surface of the camshaft gears. 8. Check the runout of the inner and outer gear thrust surfaces. CAMSHAFT GEAR THRUST SURFACE RUNOUT SPECIFICATIONS Camshaft Gear Thrust Surface Runout . . . . . . . . . . . . . . . . 0.10 mm (0.004 in.) RG,CTM42,G16,24-19-23SEP91 CTM42 (24MAR95) 16-14 6076 Diesel Engines—S.N. (500000— ) 160101 PN=195