John Deere 400 6076 — John Deere 400 6076 User Manual

Lubrication System/Remove, Inspect, and Install Valves from Oil Conditioning Housing REMOVE, INSPECT, AND INSTALL OIL PRESSURE REGULATING VALVE, OIL FILTER BYPASS VALVE, AND OIL COOLER BYPASS VALVE See OIL FILTER AND OIL CONDITIONING HOUSING ASSEMBLY, earlier in this group, for illustration of valves. NEW OIL FILTER BYPASS VALVE SPRING SPECIFICATION Working Load at 64—78 N . . . . . . . . . . . . . . . . . . . . . 30.0 mm (14—18 lb force) (1.18 in.) • Oil Pressure Regulating Valve Spring Free Length . . . . . . . . . . . . . . . . . . . 44.0 mm (1.73 in.) 1. Remove plug (T), O-ring (S), spring (R), oil pressure regulating valve (Q) from housing (I). Discard O-ring. 4.

Dip all parts in clean engine oil, insert valve and spring in housing. 2. Inspect valve and valve bore for damage. Replace if necessary. 5. Install new O-ring on plug. Install plug and tighten securely. 3. Check spring for proper compression. NOTE: Filter bypass valve operating pressure is 210 kPa (2.10 bar) (30 psi). NEW PRESSURE REGULATING VALVE SPRING SPECIFICATION Working Load at 66—74 N . . . . . . . . . . . . . . . . . . . . . 43.0 mm (15—17 lb force) (1.69 in.) • Oil Cooler Bypass Valve 1. Remove plug (E), O-ring (F), spring (G), and oil cooler bypass valve (H) from oil conditioning housing (I). Discard O-ring. Spring Free Length . . . . . . . . . . . . . . . . . . .

85.0 mm (3.35 in.) 4. Dip all parts in clean engine oil, insert valve and spring in housing. 2. Check housing for clogged passages and all other parts for scale build-up. 5. Install plug using a new O-ring and tighten securely. 3. Clean all parts with a stiff bristle brush and solvent, if necessary. Dry with compressed air. • Oil Filter Bypass Valve 4. Inspect bypass valve for damage. Replace if necessary. 1. Remove plug (M) with O-ring (N), spring (O), and oil filter bypass valve (P) from oil conditioning housing (I). Discard O-ring. 5. Check bypass valve spring for proper specifications. Replace if not within specifications. 20 5 2. Inspect valve and housing bore for scoring or damage.

Replace if necessary. NEW OIL COOLER BYPASS VALVE SPRING SPECIFICATION Working Load at 64—78 N . . . . . . . . . . . . . . . . . 30.0 mm (14-18 lb force) (1.18 in.) 3. Check spring for proper compression. Replace if necessary. Spring Free Length . . . . . . . . . . . . . . . . . . . 44.0 mm (1.73 in.) CTM42 (24MAR95) 20-5 6076 Diesel Engines—S.N. (500000— ) RG,CTM42,G20,29-19-12APR93 160101 PN=208