John Deere 400 6076 — John Deere 400 6076 User Manual

Lubrication System/Install Oil Filter and Oil Conditioning Housing INSTALL OIL FILTER AND OIL CONDITIONING HOUSING RG5904 -UN-20AUG91 A—Oil Conditioning Housing C—Oil Cooler D—Gasket E—Tab B—Gasket 1. Remove all gasket material from cylinder block and oil conditioning housing (A). 2. Install gasket (D), engine oil cooler (C), gasket (B), and oil conditioning housing onto cylinder block using 5/16 x 3 in. studs. Tab (E) on gasket with silicone bead should be downward and to the right. RG,CTM42,G20,9 -19-09OCT92 3. Tighten cap screws to 20 N·m (15 lb-ft) following sequence shown in diagram. 4. Retighten cap screws to 37 N·m (27 lb-ft) following same sequence. 20 6 NOTE:

It may be helpful to put an ink mark on each cap screw after tightening each time to assure all cap screws have been tightened. RG5905 -UN-16AUG91 CTM42 (24MAR95) 20-6 6076 Diesel Engines—S.N. (500000— ) RG,CTM42,G20,10-19-09OCT92 160101 PN=209