John Deere 400 6076 — John Deere 400 6076 User Manual

Lubrication System/Inspect Oil Pump Drive Gear CHECK PUMPING GEAR BACKLASH 1. Mount dial indicator with indicator plunger resting against side of gear tooth. 2. Hold idler gear stationary. Slowly rotate drive gear back and forth until contact with idler gear is felt. If backlash is not within 0.33—2.00 mm (0.013—0.079 in.) specification, there is excessive pumping gear wear and/or idler shaft and gear bushing wear. If there is less than 0.33 mm (0.013 in.) backlash, re-clean gears and check backlash again. RG5918 -UN-16AUG91 3. Replace oil pump if pumping gear backlash exceeds 2.00 mm (0.079 in.). RG,CTM42,G20,21-19-16AUG94 INSPECT OIL PUMP DRIVE GEAR NOTE:

Oil pump does not need to be removed from engine, when inspecting drive gear. 20 12 1. Inspect drive gear teeth for chips, cracks, or wear. Replace as necessary. RG6435 -UN-13OCT92 RG,CTM42,G20,31-19-09OCT92 CTM42 (24MAR95) 20-12 6076 Diesel Engines—S.N. (500000— ) 160101 PN=215