Air Intake And Exhaust System/Turbocharger Seven-Step Inspection 2. Inspect the wheel blades and housing for evidence of wheel rub (arrow). Wheel rub can bend the tips of the blades with the housing showing wear or damage. RG4528 -UN-20DEC88 S11,3005,IL -19-11SEP92 External Center Housing and Joints 1. Visually check the outside of the center housing, all connections to the compressor, and turbine housing for oil. RG4529 -UN-20DEC88 NOTE: If oil is present, make sure it is not coming from a leak at the oil supply or return line. S11,3005,IM -19-07AUG92 Internal Center Housing 1. Using a flashlight, look through the oil return hole (A), to check the condition of the shaft and/or bearings.
There should not be excess carbon deposits on the shaft or in the housing. RG4530 -UN-20DEC88 S11,3005,IN -19-07AUG92 30 12 2. Excessive “blueing” or “coking” of oil along the complete length of the shaft (A) indicates a possible lack of lubrication caused by an engine failure, or improper operation, such as hot shutdowns. RG4531 -UN-20DEC88 CTM42 (24MAR95) 30-12 6076 Diesel Engines—S.N. (500000— ) S11,3005,IO -19-07AUG92 160101 PN=257