Air Intake And Exhaust System/Turbocharger Seven-Step Inspection Turbocharger Bench Test 1. Mount the turbocharger in a vise. 2. Rotate the shaft, using both hands, to check rotation and clearance. The shaft should turn freely, however, there may be a slight amount of drag. RG4532 -UN-20DEC88 S11,3005,IP -19-29APR93 3. Next, pull up on the compressor end of the shaft and press down on the turbine end while rotating shaft. Neither the compressor wheel nor the turbine wheel should contact the housing at any point. NOTE: There will be some “play” because the bearings inside the center housing are free floating. RG4533 -UN-20DEC88 S11,3005,IQ -19-07AUG92 4.
Next, check shaft endplay by moving the shaft back and forth while rotating. There will be some endplay but not to the extent that the wheels contact the housings. RG4534 -UN-20DEC88 S11,3005,IR -19-07AUG92 30 13 CTM42 (24MAR95) 30-13 6076 Diesel Engines—S.N. (500000— ) 160101 PN=258