Air Intake And Exhaust System/Perform Radial Bearing Clearance Test PERFORM RADIAL BEARING CLEARANCE TEST This test will give an indication of the condition of radial bearings within the center housing and rotating assembly. 1. Fasten a magnetic base (plunger-type) dial indicator to the turbocharger mounting base. Assemble an extension adapter and indicator extension rod onto dial indicator. 2. Position indicator tip (through center housing oil return) on center of shaft. Preload indicator tip and zero dial on indicator. R20006 -UN-20DEC88 3. Grasp rotating shaft at both ends and move the shaft toward the indicator then away from the indicator (arrows).
Use care to move the shaft in the same direction as the dial indicator tip travels and apply equal pressure at both ends of the shaft. 4. Observe and record the total dial indicator movement. TURBOCHARGER SHAFT RADIAL MOVEMENT SPECIFICATION Garrett/AiResearch . . . . . . . . . . . 0.08—0.15 mm (0.003—0.006 in.) Schwitzer . . . . . . . . . . . . . . . . . . 0.13—0.18 mm (0.005—0.007 in.) If total indiactor reading is not within specification, replace center housing and rotating assembly. (See REPLACE CENTER HOUSING AND ROTATING ASSEMBLY, later in this group.) RG,CTM42,G30,29-19-29OCT92 30 15 CTM42 (24MAR95) 30-15 6076 Diesel Engines—S.N. (500000— ) 160101 PN=260