John Deere 400 6076 — John Deere 400 6076 User Manual

Air Intake And Exhaust System/Repair Turbocharger PERFORM AXIAL BEARING END PLAY TEST This test will give an indication of the condition of the thrust bearing within the center housing and rotating assembly. 1. Mount magnetic base dial indicator (arrow) so indicator tip rests on flat surface on turbine end of shaft. Preload indicator tip and zero dial on indicator. R24653N -UN-20DEC88 2. Move shaft axially back and forth by hand. 3. Observe and record total dial indicator movement. TURBOCHARGER SHAFT AXIAL END PLAY SPECIFICATION Garrett/AiResearch . . . . . . . . . . . 0.03—0.10 mm (0.001—0.004 in.) Schwitzer . . . . . . . . . . . . . . . . . .

0.05—0.13 mm (0.002—0.005 in.) If bearing end play is not within specifications, replace center housing and rotating assembly, as outlined later in this group. RG,CTM42,G30,28-19-29OCT92 REPAIR TURBOCHARGER AiResearch/Garrett and Schwitzer turbochargers used on the engines covered in this manual are available through service parts as a complete remanufactured assembly or as a new center housing and rotating assembly only. When a new center housing and rotating assembly are being installed, thoroughly inspect and reuse turbine and compressor housings from existing turbocharger. New mounting hardware MUST be used. IMPORTANT:

Repairing a turbocharger center housing and rotating assembly requires specialized tooling and highly trained personnel and thus it is not recommended that the turbocharger be disassembled completely. 30 16 CTM42 (24MAR95) 30-16 6076 Diesel Engines—S.N. (500000— ) CTM8,GR30,7 -19-13JAN95 160101 PN=261