Air Intake And Exhaust System/Inspect and Repair Intake Manifold and Cover INSPECT AND REPAIR AFTERCOOLER (6076A ENGINES) 1. Inspect aftercooler for overall condition. The fins should be reasonably straight, and cross straps should be free of cracks. 2. Inspect aftercooler inlet and outlet hoses. Replace either hose if cracked or damaged. 3. Test the aftercooler for leaks by plugging one of the tubes (A). RG5572 -UN-04JUL89 4. Apply compressed air to the other tube while unit is submerged under water. Use 140—170 kPa (1.4—1.7 bar) (20—25 psi) air pressure for testing. IMPORTANT: Coolant leakage from the aftercooler may cause severe engine damage.
A minor leak that is accessible may be repaired. However, if the condition of the core is questionable, replace the aftercooler. RG,CTM42,G30,47-19-29OCT92 INSPECT AND REPAIR INTAKE MANIFOLD AND AIR INTAKE COVER (6076A ENGINES) 1. Inspect air intake cover (A) for cracks or damage. Replace as necessary. 2. Check intake manifold (B) for damage. Inspect machined mounting surfaces for burrs or other defects which might prevent gaskets from sealing properly. Repair as required. RG5750 -UN-05AUG91 3. Thoroughly steam clean interior of intake manifold and covers. 30 26 IMPORTANT: Do not use a hot tank to clean aluminum parts as damage and severe deterioration can occur. 4.
Scrape all gasket material from cylinder head and intake manifold mounting surfaces. CTM42 (24MAR95) 30-26 6076 Diesel Engines—S.N. (500000— ) RG,CTM42,G30,48-19-29OCT92 160101 PN=271