Fuel System/Replace Rectangular Fuel Filter Element RELIEVE FUEL SYSTEM PRESSURE N CAUTION: Escaping diesel fuel under pressure can have sufficient force to penetrate the skin, causing serious injury. Before disconnecting lines, be sure to relieve pressure. Before applying pressure to the system, be sure ALL connections are tight and lines, pipes and hoses are not damaged. Keep hands and body away from pinholes and and nozzles which eject fluid under pressure. Use a piece of cardboard or wood, rather than hands, to search for suspected leaks.
X9811 -UN-23AUG88 If ANY fluid is injected into the skin, it must be surgically removed within a few hours by a doctor familiar with this type injury or gangrene may result. Doctors unfamiliar with this type of injury may call the Deere & Company Medical Department in Moline, Illinois, or other knowledgeable medical source. Any time the fuel system has been opened up for service (lines disconnected or filters removed), it will be necessary to bleed air from the system. (See BLEED FUEL SYSTEM in Group 115.) RG,CTM8,G35,6 -19-29SEP94 REPLACE RECTANGULAR FUEL FILTER ELEMENT NOTE: Refer to your operator’s manual for proper servicing and replacement (hourly) intervals. 1.
Close fuel shut-off valve at bottom of fuel tank (not illustrated). 2. Loosen bleed plug (C) and remove drain plug (B). Drain fuel from filter. 35 6 RG5866 -UN-19AUG91 3. With fuel filter firmly against base, lift up on top retaining spring and pull down on bottom retaining spring. Pull fuel filter off guide pins (A) of fuel filter base and discard. CTM42 (24MAR95) 35-6 6076 Diesel Engines—S.N. (500000— ) RG,CTM42,G35,2 -19-03OCT92 160101 PN=283